Below is only a summary of product data. Please download the product datasheet for complete details. English: Product Data MSDS Spanish: Product Data MSDS French: Product Data MSDS
| Generic Type | Modified Polyamine Epoxy | ||||||
|---|---|---|---|---|---|---|---|
| Common Usage | A clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats. | ||||||
| Colors | Clear. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats. | ||||||
| Finish | Gloss. The texture of the finished surface depends on the number of coats applied. | ||||||
| Intermediate | Series 222, 223, 224, 237 | ||||||
| Topcoats | Series 284, 285, 295 | ||||||
| Volume Solids | 100% (mixed) | ||||||
| Recommended DFT | As a finish coat: 8.0 to 10.0 mils (205 to 255 microns) per coat. As an intermediate coat with Series 285 or 295: 14.0 to 16.0 mils (355 to 405 microns) per coat. |
||||||
| Curing Time |
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. |
||||||
| Volatile Organic Compounds | 0.16 lbs/gallon (19 grams/litre) | ||||||
| Theoretical Coverage | 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. | ||||||
| Number of Components | Two: Part A and Part B (2 Parts A component to 1 Part B component by volume) |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| This ProductModified Polyamine Epoxy | ||||||||
|
||||||||
Modified Polyamine Epoxy
|
||||||||
|
||||||||
Modified Novolac Polyamine Epoxy
|
||||||||
|
Series 284 Deco-Clear was used at St. John's Mercy Heart Hospital Center in St. Louis, MO.